VFI 10000 ICR IoT
3,750.000€
No tax
VFI 10000 ICR IoT
Model: VFI 10000 ICR IoT
SKU: 10122214
- IoT Solution with the PW-WinPower App
- Output Power Factor 1.0
- Optimized Battery Management (OBM) – for longer Battery Life
- EBM Auto-Detection for easy setup of External Baterry Packs
- Parallel Operation, up to 3 units
- Built-in ethernet port offers Modbus TCP/ IP
- Internet Options: LAN Cable or WLAN Dongle
security guarantee
Appropriate packaging
Exchange under warranty
VFI 10000 ICR IoT
Model: VFI 10000 ICR IoT
SKU: 10122214
- IoT Solution with the PW-WinPower App
- Output Power Factor 1.0
- Optimized Battery Management (OBM) – for longer Battery Life
- EBM Auto-Detection for easy setup of External Baterry Packs
- Parallel Operation, up to 3 units
- Built-in ethernet port offers Modbus TCP/ IP
- Internet Options: LAN Cable or WLAN Dongle
The PowerWalker VFI 6000-10000 ICR IoT Series is the next generation of UPS, offering an intuitive App for remote monitoring via cloud. The UPS is quickly setup and easy to maintain, and it provides the ability to review the workflow and troubleshoot instantly regardless of time and place. This cloud based monitoring increases the availability and quality of traditional monitoring, while at the same time allowing room for cost reduction, scalability, and trend analysis.
This UPS series utilizes double conversion (Online) technology and features unity power factor, ensuring the availability of your mission critical equipment and providing clean output power to your sensitive loads. Multiple optional accessories such as external battery packs, communication cards and a WLAN adapter enhance the functionality of the UPS.
The UPS is available in 2 different Variations:
ICR: Complete Solution including battery pack
ICRE: ONLY the UPS engine without battery pack and MBS/PDU
| General Features | |
| Type | Online Single Phase (VFI) |
| Phases (IN-OUT) | 1-1 |
| Form Factor | Rack, Tower |
| Rack Units [U] | 5U |
| Power Capacity | 10000VA / 10000W |
| Output Power Factor | 1.00 |
| Input | |
| Input Voltage Range | 160-300V 100% load, 110-160V derating to 50% load linearly |
| Max THDi | <3% linear load; <5% non-linear load |
| Frequency Range | 40Hz – 70Hz |
| Frequency (Synchronized Range) | 50Hz or 60Hz |
| Output | |
| Waveform | Pure Sine Wave |
| Nominal Output Voltage | 220/230/240 VAC |
| Voltage Regulation (Battery Mode) | ±1% |
| Input & Output Connectors | |
| Input Connector | Terminal |
| Output Type | Terminal |
| Terminal Output | Yes |
| Technical Details | |
| LINE Mode Efficiency [%] (Full Load) | 95.0 |
| Transfer Time (AC / Line Mode or Battery Mode to ECO Mode) [ms] | <10ms |
| Transfer Time (AC / Line Mode to Battery Mode) [ms] | 0ms |
| Transfer Time (ECO Mode to AC / Line Mode or Battery Mode) [ms] | 10ms |
| Transfer Time (Line Mode or Battery Mode to Bypass Mode) [ms] | 0ms |
| Additional Features | ECO Mode Available, CVCF Mode Available, OBM – Optimized Battery Management, Parallel Connectivity, REPO – Remote Emergent Power-Off, LCD Display, Unity Power Factor 1.0, Battery Pack Available, IoT – Cloud Connectivity, Generator Compatible, HID – Human Interface Device, Hot-Swappable Batteries, EBM – External Battery Module – Auto Detection |
| IEC 62040-3 classification | VFI-SS-111 |
| Batteries and Autonomy | |
| Batteries | 20x 12.0V/9.0Ah |
| DC Voltage | 20x 12.0V |
| Recharge Time | 3h to 90% |
| Full Load Backup Time [min] | 3.0 |
| Half Load Backup Time [min] | 8.2 |
| Charger | 1A – 4A [2A] |
| External Battery Pack | Yes |
| Communication | |
| Communication | Dry contact, USB Type B – for Monitoring Software, RS-232, WLAN Port – for Internet Connection, Management Card Slot, RJ-45 – for Internet Connection |
| Software | WinPower |
| Parallel Operation [Units] | 3 |
| Environment | |
| Noise Level | < 55db |
| Fan Logic |
Always on, Automatic Speed Control |
| Temperature | 0°C – 45°C |
| Humidity | 0% – 95% RH (non-condensing) |
| IP | IP 20 |
| Logistics | |
| Package Content | Bundle (Please see additional packaging information) |
| Manual Languages | EN |
| EAN | 4260074983203 |
| Product Dimensions (DxWxH) [mm] | 559 x 438 x 215 mm |
| Product Weight [kg] | 75.7 |
VFI 10000 ICR IoT
Model: VFI 10000 ICR IoT
SKU: 10122214
- IoT Solution with the PW-WinPower App
- Output Power Factor 1.0
- Optimized Battery Management (OBM) – for longer Battery Life
- EBM Auto-Detection for easy setup of External Baterry Packs
- Parallel Operation, up to 3 units
- Built-in ethernet port offers Modbus TCP/ IP
- Internet Options: LAN Cable or WLAN Dongle